Your shopping cart is empty!
We'll keep you bang up-to-date with new products, exclusive deals, events and loads of other cool stuff!
Brand: British Drum Co
Based in Stockport and founded by Master Drum Builder Keith Keough, The British Drum Company adheres to the proudest traditions of British drum manufacturing, using only British made shells, employing striking design and committing to constant innovation.
Legend is the British Drum Company's flagship drum set and is the ultimate offering for any drummer.
A culmination of tried and tested traditional methods of shell moulding have resulted in a cold pressed birch shell with mahogany reinforcement rings. Renowned for its studio qualities and live performance, the birch shell pushes very strong mid to high end frequencies and channels a powerful clean tone, that is enhanced by our signature mahogany reinforcement rings.
The shell is furnished with a hand cut 45 degree bearing edge which is finished to a very high standard. Attention to detail is taken in every aspect of the Legend's make up, and no other kit rivals it for its unique cold pressed shells and tonal quality.
The birch ply shell is made up from a 10ply, 6mm thick shell using cross laminated plies. Using almost as many plies to every mm creates a super strong shell for its thickness that enhances the tonal character of the birch shell. The Legend kit is available in six standard finishes but can also be tailored to your specific finish on special request.
Club 22 3pc Sizes:
Finish: Buckingham Scarlett (veneer)
*Tom mount, stands, snare and cymbals not included.
For more about British Drum Co click HERE
New for 2016 - Keystone X - a bold new twist on the classic Ludwig sound.
Rather than merely revisiting the sound that made them famous, Keystone Series Drums carve a new niche in Ludwig's sonic identity. In fusing of their Classic Maple shell core with American Red Oak, Keystone's "pre-EQ'd" tone sculpts focus and articulation for the drummer seeking volume, attack, and power.
Made in the USA
Keystone Series is made under the same strict quality and structural standards as all Classic Maple and Legacy drums. A perfect balance between high-volume cut and subtle articluation is achieved for the live music drummer, putting a modern twist on a century of custom American drum making.
Three-ply Classic Maple core with 1/16" inner and outer plys of American Red Oak.
Keystone's 5-ply combination of a Classic Maple three-ply core between inner and outer 1/16" plys of American Red Oak creates a thin, dense shell that speaks loudly with quick, even decay. To draw further resonance from this unique hybrid, the dual 45-degree bearing edge is pulled to the center of the shell to seat perfectly into the head.
Finish: Arctic Oak - matte lacquered shell (inner and outer)
Brand: Liberty Drums
Proudly made in Monroe, North Carolina, Ludwig takes great care in selecting only the finest quality materials for Classic Maple drums.
This process starts with select North American maple. The maple is cut into panels. The outside panel is 1.8mm thick, two ply, cross laminated maple. Cross lamination is the process in which the panels are made of two glued plies of wood, with the grain direction of one ply at 90 degrees in relation to the grain direction of the adjacent ply. The outside grain runs circumferential with the shell.
The center panel is 2.4 mm thick, three ply, cross-laminated maple. The middle ply runs circumferential with the shell, and the outer plies are at 90 degrees. The inside panel is 1.8mm thick, two ply, cross laminated maple. The inside grain runs circumferential with the shell. This gives the 7-ply shells a total thickness of 6mm.
The bearing edges are cut to a 45 degree angle within 1/16" from the outside edge. The sharp edges are rounded by light sanding for a smooth even surface. This process results in what is the unmistakable signature Ludwig sound.
MTS Sizes (Made To Stock):
Finish: White Marine Pearl Standard Wrap
*Stands and cymbals not included. All kits are pre-order only.
MORE INFO - download the Classic Maple brochure here: http://www.ludwig-drums.com/pdf/AV2LU900.pdf
Brooklyn, USA where Gretsch drum kits were born, back in 1883. Brooklyn series celebrates the rejuvenated Brooklyn city passion and spirit and expands on its distinctive shared American experience. These truly beautiful drum kits are hand-crafted by a team of veteran drum builders.
The Gretsch Brooklyn drum kit has its own distinguishable sound by fusing old drum building techniques with modern attributes. The new 3mm 302 double flange hoops which are a feature with this drum kit are inspired by the classic Gretsch hoops from the 1950’s, they produce a much more open and ambient sound than that of the traditional die-cast hoops. If you are already a fan of Gretsch drums then you are going to absolutely love the Brooklyn Drum Kit.
3pc Shell Pack Sizes:
Finish: Black Oyster Wrap
*Tom holder, snare drum, stands and cymbals not included.
*Pic shows 13x9in tom for illustration only/
Brand: Drum Workshop
*Please Note: Stands, Snare, Cymbals and Tom Holders are not included.
Whether on stage or in the studio the Birch Series provides workhorse versatility with unquestionable thoroughbred performance.
Birch, a hardwood, gives a full bodied sound as its tight grain
structure produces plenty of low-mid punch. Birch, although more
resonant in the top end than Ash, still has plenty of attack while
maintaining a ‘mid-scooped’ tone, a quality favoured by studio engineers
and recording artists.
Birch shells are 7 ply and feature a high gloss lacquer finish.
Finish: Tobacco Fade lacquer
Pack only - snare drum, tom holders, stands and cymbals are not included.
From those very first amplifiers built in the back of Jim Marshall's
music shop in 1960s London, right through to the present day
purpose-built factory in Milton Keynes, Marshall Amplification has
always supported British design, British innovation and British
manufacturing. It's this ethos that has made the Marshall name, and of
course the Marshall sound, recognised the world over. Constant research
and development, the manufacture of high quality products and the active
search for new opportunities are at the very heart of Marshall. This is
the reason why Marshall Amplification is proud to be affiliated with
iconic British percussion brand Natal UK.
Natal is committed to producing drums and hardware of the highest
standard of quality. As well as being British designed Natal drums and
hardware are British quality controlled. This means that ply shells,
flat metal shells and hardware, exclusively manufactured in Taiwan, are
quality controlled by Natal’s dedicated team working closely with all
factory departments at every stage of manufacture. This is essential in
communicating the high standard of quality required. Being there on the
ground, face to face, also builds greater synergy between Natal UK and
the production team in Taiwan. This partnership ensures that Natal drums
and hardware exceed expectations. Exclusive manufacturing and the
‘hands on’ approach to quality control means that Natal raises the bar
in terms of innovative design presented with consistently high build
With a range of new finishes and
configurations for 2016, the new Gretsch Catalina Club Series blends
classic tone with sleek, contemporary hardware innovations. These new
4-piece configurations are built around the foundation of the beloved
14-inch deep bass drum that gives each of these setups a warm and punchy
vintage tone.Catalina Club’s hardware components give
the series a distinctive “new Gretsch” flair that pays homage to the
company's rich tradition, while infusing an exciting and progressive
personality. From the round “gas cap” bass drum mount plate and Mini GTS
mounting system to the reduced-mass tom mount brackets and Gretsch
T-Wing screws and bolts, Catalina Club has an incredible
drummer-friendly feel.The classic mahogany shells are still
built with the same natural shell interior and 30-degree bearing edge
that made them famous. Bass drums include telescopic spurs and matching
wood bass drum hoops. Toms and snare drums feature 1.6mm triple flanged
hoops and all Catalina Club drums are equipped with Remo® drum heads.
Finish: Satin Walnut GlazeSpecifications:
Pre-owned Yamaha Rick Marotta Signature Hipgig kit.
Condition of the kit is good. There is some minor scratch damage to the to top of the bass drum and on the inside of the shell where the drums have been packed away. This is expectant, due to the nature of the kit. The overall sound is not affected.
The ultimate portable drum set, the Rick Marotta Signature Hipgig drum set packs a powerful punch in a small package. The easiest and fastest kit to set up and tear down that fits in just about any vehicle.
The Rick Marotta signature hipgig offers drummers a shell pack that can be packed into a compact case for easy transport. When packed up, the two tom toms and snare drum fit neatly into the two-piece bass drum. The set comes complete with special Remo heads. For performance that is hard to believe, in a kit as compact as this, take a closer look.
"In all the years I've been with Yamaha I have never put my name on any one product, because I could never make up my mind. I could not, however resist the Hipgig kit. It is one of the great drum innovations by Yamaha and Takashi (Hagi) Hagiwara. I have been using it live and in the studio for all types of music. Everytime someone hears or plays it, they are surprised that such a small kit has such a diverse sound. It is also the most intelligently designed portable kit I have ever seen." — Rick Marotta
Height adjustment on the pedal side of the bass drum is possible with the pipe post stabilizer. Use of this system ensure that the beater makes contact at the center of the head. The stabilizer fits into a pipe clamp on the underside of the drum that allows quick and easy adjustment of the height. The post is equipped with a memory clamp that ensures subsequent settings will be quick and precise every time, while a pair of supports provides added stability.
Please note: There is no manufacturers warranty on Pre-Owned products.
The Zildjian 14" K Custom Hybrid Reversible HiHat Pair is available for a
limited time only and celebrates 10 years of the innovative K Custom
Developed in conjunction with Japanese freelance jazz
fusion drummer Akira Jimbo, these cymbals feature a
brilliant/traditional finish combination that produces a variety of
tones depending where they're played. The reversible nature of this
HiHat pair gives you a greater variety of tonal possibilities for your
On one cymbal of the Zildjian 14" K Custom HiHats, the inner
half features an unlathed and brilliant finish, while the outer half is
traditionally finished with K Zildjian style lathing. The unlathed
section helps control the wash and sustain, making it ideal for
situations where you need more blend in your HiHat sound.
On the other cymbal, the inner half has a traditional finish, while
the outer half is unlathed with a brilliant finish. This cymbal also
features the innovative "reverse Mastersound edge hammering" which
eliminates airlock where areas between hammer marks strike the other
cymbal - creating a softer Mastersound tone.
Bliss series are new cymbals made in the ancient tradition. Every one is an individual work of art, painstakingly hand forged, and hand hammered.
They have a warmth that seduces at low volume and thunders with a froth of dark undertones at more extreme volumes. These cymbals come alive, shimmering and wobbling as if the mere touch of human hands excites the cymbal and it can’t wait to get it’s voice out there and sing.
They are exceptionally resilient and slightly soft on the stick. The undertones are warm, rich, dark with an edge of dragon’s breath. Each one is a unique, complex voice that will excite your imagination.
These smaller BLISS Cymbals are extremely effective, responsive cymbals. You can play all Bliss cymbals with just your fingertips or crash with your hands or mallets, but they are equally at home under the most driving stick. A little bit of that raw ocean surf and tantalizing trashiness supports the distinctive burst of sound generated by these exceptional crash cymbals.
The attack is immediate. And the bright sound of this cymbal - powered
by silver it its B20 Bronze - slices through the music around it. From
low volumes to loud, this cymbal explodes with power and sustain.
For the discerning drummer, the award winning Natal Bubinga Series combines rich tone with the striking and stylish look of highly figured wood.
Bubinga is a hard tropical timber with a predominantly straight interlocking grain, widely chosen for its distinctive good looks as well as it brighter response. Yet due to its density Bubinga maintains balanced resonance throughout all ranges of tuning and has an underlying richness and depth of tone that makes it a popular choice with professional drummers.
Rock configuration includes:
Finish: Natural Bubinga lacquer
Bubinga is known for it's highly figured finish. Bubinga is a very hard tropical timber with a predominately straight interlocked grain. Widely chosen for it's bright response, it is also a very dense wood so it offers a loud but balanced resonance throughout all ranges of tuning. Bubinga is a hard tropical wood that is capable of introducing very delicate bright high range tones to the underlying depth.
With a complete no-compromise approach, Natal utilise the same lug boxes throughout all drum set ranges. They are designed to be both supremely functional whilst retaining the Natal heritage with the use of our distinctive sun logo. The lugs are highly polished chrome plated zinc, with a very heavy wall thickness, mounted on an insulating plinth. Each lug has a Mass of 0.061kg.
Natal Resonance Mount (NRM)
The Natal Resonance Mount (NRM) is completely unique. With absolutely zero contact via our Tom mounting system, the NRM allows maximum resonance. Mass of 0.202kg.
The tom mounting bracket and floor tom mounting brackets again feature a completely unique design incorporating Natal's 1960's logo. They're ultra heavy duty, feature an integrated memory lock and have a mass of 0.984kg. The tom mount is designed to fit an L-arm with a minimum diameter of 9.5mm up to 13mm.
Bass Drum Spurs
Natal's no compromise Bass Drum Spurs offer un-paralleled strength and stability. Extending from 260mm up to 360mm, each spur has a mass of 1.128kg.
*Shell pack only - snare drum, tom holders, stands and cymbals not included.
NEW for 2016 - the Mapex STORM kit!
The Mapex Storm Rock Fusion set is the best complete drum set perfect for the first time player needing a set with all of the hardware included. The all poplar Mapex Shells have the Mapex SONIClear™ bearing edge making tuning very simple and gives the drums plenty of tone. The 22" bass drum delivers a punchy low end. All of the hardware is double braced and along with the drums boast one of the best warranties in the business.
The 5-Piece Rock Fusion Kit includes 10" and 12" bass-mounted rack toms, a 14" snare drum, and a 22" bass drum. The smaller and shallower rack toms make placement easier and overall set-up more comfortable while the large floor tom delivers a big sound.
22 Rock Fusion Sizes:
Hardware: TH656, B400 Boom Stand, C400 Cymbal Stand, H400 Hi-Hat, S400 Snare Stand.
Finish: Deep Black (IZ) wrap
Finish: Camphor Wood Grain (IC) wrap
The Falcon Single Pedal (P1000) and the Falcon Double Pedal (P1000TW) are completely new designs from Mapex and both models are designed to be the smoothest-playing pedals ever made.
The Falcon’s exclusive hollow inox steel drive shaft offers the utmost in strength without adding unwanted drag or excess weight. This increases the smooth operation of the pedal and gives Falcon a sensationally smooth feel. By allowing the torque-free spring mechanism to move independently the Falcon’s stroke and recoil motions are exceptionally smooth and feel more natural to the foot.
"Every feature and adjustment has been engineered to make Falcon feel as if it's an extension of your foot," said Joe Hibbs, R and D Manager at Mapex USA. “Every artist that has tested this pedal has been able to fine tune it to their liking within minutes — right out of the box. Falcon is a pedal for the people. This is a pedal that can satisfy virtually every drummer.”
Because the Falcon’s footprint is more compact than other bass drum pedals, it’s easy to comfortably position between the hi-hat and snare stands. The Falcon’s easy-to-reach, resistance-free Talon clamp adjustment can be tightened with one hand from a seated position, making set-up quick and easy, even in the tightest spaces.
The Falcon’s patented Talon bass drum hoop clamp features locking claws that move independently from the pedal frame. Even if the bass drum is pitched at a severe angle, the pedal remains flat to the floor and securely clamped to the drum for the utmost comfort and security
The Falcon is equipped with interchangeable cams to suit each player’s individual style. The “Glide” cam offers an equal amount of inertia from the beginning to the end of the stroke, while the “Pursuit” cam is recommended for increased power and maximum impact. The reversible beater head comes with interchangeable 10 gram and 20 gram inserts. By choosing one of these weights (or playing without any additional weight at all) the player can choose the desired degree of centrifugal force.
The Falcon’s footboard design provides the feel of a longer board without the additional weight and mass. A lighter footboard provides greater control with less fatigue and its uniquely sculpted profile allows the players to position his foot at any angle and operate the pedal with minimal expended energy, making even the most intricate patterns seem effortless.
The footboard angle and beater angle are independently adjustable, enabling the player to fine-tune the ideal combination of playing comfort and force of stroke. The footboard and heel plate are hinged using an exclusive sealed bearing mechanism that offers zero resistance and secure operation with no lateral movement.
The bright sound of these cymbals - powered by silver in its B20 Bronze - slice through the music around them.
V5005BP Vault V-Series Promotional Set
Pearl's double chain drive glides silently within the cam channel providing a super smooth, quiet, powerful precision feel. Since there are no sprockets involved, there is much less wear on the chain and less noise in the studio. Includes case.
Bass pedals rely on the shape of the cam - round or offset, large or small - to give each pedal its characteristic action and feel. Some brands offer more than one shape to cater to the diverse style differences and preferences of the drumming public. Unfortunately, if you want another cam you have to buy a whole new pedal or install a new cam providing you can buy one separately in the first place.
Pearl`s PowerShifter Eliminator pedal comes standard with four cams, each with a unique shape and all interchange at the push of a button thus giving the Eliminator the action and feel of four different pedals for the price of one!
Interchangeable Cam System:
The interchangeable cam system features four uniquely shaped cams. The Black Cam is Pearl's original linear-feel cam for smooth, well-balanced action. The White Cam is also linear but larger in diameter for a lighter feel and increased power. The Blue Cam is offset and starts with a light feel at the beginning of the stroke and accelerates with speed and power upon impact. The Red Cam is radically offset and provides great response for sensitive footwork and extreme power upon impact. The Purple Cam is right in between the Blue and Red cams so it splits the difference. The Yellow Cam has a top-heavy feel and it can play moderate tempos with very even dynamics. For example, when playing shuffles, the second beat of the "duh-duh" is as strong as the first. All cams attach and detach easily at the push of a button.
Belt Drive and Dual Chain Drive:
PowerShifter Eliminator pedals are available with either dual chain drive or belt drive. The belt is made from three plies of super-strength polymers for extreme dependability, smoothness and quiet action. Both chain and belt drives are adjustable to allow the angle of the footboard to be set to ones preference. Additionally, the chain (model #CCA-5) and belt (model #BCA-1), both available at your authorized Pearl dealer, can be quickly interchanged using only a drumkey and Phillips head screwdriver.
Traction Control Footboard:
The footboard features Pearl`s Traction Control system that permits the user to alter the amount of slip-resistance on the footboard for optimum control and speed. The integrated Traction Plate features Traction Grip dots, rubberized disks, that can be removed completely or inserted one at a time and selectively positioned to provide just the right amount of slip-resistance where you want for your playing style. In addition, the Traction Plate can be rotated with the Traction Grip dots facing toward the front or the rear of the pedal for traction control near the ball of the foot or near the toes for additional customization of the feel.
The PowerShifter allows the footboard to move forward or backward to change the leverage for light, normal, or heavy feel. Combined with the Interchangeable Cam System, the PowerShifter Eliminator is the most adjustable pedal in the world.
Ergonomically Designed Footboard and Heel:
Featured on all PowerShifter Eliminator, PowerShifter and PowerPro pedals. Footboard surfaces are smooth for "power slides" but give ample resistance for control. Integrated hinge adds speed and increases reliability. The heel is tapered for comfort and control.
Toe Clamp Height Adjuster:
The PowerShifter Eliminator features a Toe Clamp height adjuster that accommodates bass drum hoop of all thickness. The pedal is secured to the drum hoop with a side mounted clamping system that allows easy attachment and removal.
Stainless Steel Universal Joints:
All Pearl Double Pedals feature precision Stainless Steel Universal Joints. We made them 20% thicker than standard steel universal joints to make them the most dependable and precise on the market today!
Standard on all PowerShifter Eliminator and PowerShifter pedals, the QuadBeater features 2 plastic and 2 felt faces to create four distinctly different sounds.